Fluke 190-204-III Color ScopeMeter, 200 MHz, 4 channels

Accurate and versatile, this portable oscilloscope provides a fast sampling rate of up to 5 GS/s, a 200 ps resolution, and deep memory of 10,000 samples per channel. Perform timing or amplitude-related measurements on three phases or three-axis control systems, or compare and contrast multiple test points in a circuit under test.

Key Features:

Up to four independent floating isolated inputs, up to 1000 V

• Up to 5 GS/s real time sampling (depending on model and channels used)

• Deep memory: 10,000 points per trace waveform capture (scope mode)

• CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments

• Up to seven hours of battery operation using BP291

Specifications:

Vertical Deflection
Number of Channels	4
Bandwidth	200 Mhz
Rise Time	1.7 ns
Channel Architecture	All inputs fully insulated from each other and from ground Inputs may be activated in any combination
Input Coupling	AC or DC, with ground level indicator
Input Sensitivity	With 10:1 probe, 20 mV to 1000 V/div With 100:1 probe, 200 mV to 10 kV/div Direct (1:1), 2 mV to 100 V/div
Bandwidth Limiter	20 MHz and 10 kHz
Polarity	Normal, inverted, variable
Vertical Resolution	8 bit
Accuracy at 4 s to 10 μs/div	5 mV/div to 100 V/div, ±(1.5% + 6 counts) 2 mV/div, ±(1.5 % + 10 counts)
Input impedance	1 MΩ (±1 %) // 15 pF (±2.25 pF)
Input Voltage Range
Rated Maximum Floating Voltage	CAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level)
Probe Input Voltage VPS410-II	CAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead)
Probe Input Voltage VPS421	CAT III 1000V / CAT IV 600V (maximum voltage between probe tip or reference lead to GND, 2000V max between probe tip and reference lead)
Maximum BNC Input Voltage	CAT IV 300 V (maximum voltage on BNC input directly)
Memory Save and Recall
Memory Locations (Internal)	30 waveform memories plus 10 recording memories plus 9 screen copy memories